Description
The FAST High Cut Level IIIA Ballistic Helmet — UHMWPE combines lightweight ballistic protection with a modular, mission-ready design. Its high-cut profile provides additional clearance around the ears, making it easier to use compatible communication headsets, hearing protection and other tactical equipment.
The shell is manufactured from Ultra-High-Molecular-Weight Polyethylene (UHMWPE) to balance ballistic performance, durability and weight. Integrated side rails, a front NVG shroud and accessory bungees provide mounting options for compatible equipment.
An adjustable padded liner and four-point retention system help stabilize the helmet, distribute pressure and improve comfort during extended wear. Designed for law enforcement, professional security, military personnel and other authorized protective applications.
Key Benefits
- Level IIIA handgun and fragmentation protection
- Lightweight UHMWPE ballistic shell
- High-cut profile with increased ear clearance
- Side rails for compatible tactical accessories
- Front shroud for compatible night-vision equipment
- Adjustable padded suspension system
- Secure four-point retention system
- Quick-release buckle for convenient removal
Specifications
- Product Name: FAST High Cut Level IIIA Ballistic Helmet
- Helmet Style: FAST High Cut
- Protection Level: Level IIIA
- Referenced Helmet Standard: NIJ Standard 0106.01
- Shell Material: Ultra-High-Molecular-Weight Polyethylene (UHMWPE)
- Protection Area: Approximately 1,250 cm²
- Head Circumference: 21.6–24.8 in (55–63 cm)
- Available Sizes: L / XL
- Available Colors: Black / Green / Desert Tan
- Weight: Approximately 3.2 lb (1.45 kg)
- Suspension System: Adjustable padded liner
- Retention System: Adjustable four-point chinstrap
- Buckle: Quick-release buckle
- Accessory System: Side rails, front NVG shroud and retention bungees
- Edge Finish: Reinforced rubber-sealed edge
Weight, dimensions and protection area may vary slightly according to helmet size, installed accessories and production tolerances.
Technical Features
Lightweight UHMWPE Shell
The ballistic shell is constructed from high-strength UHMWPE, providing a balance of ballistic performance, structural durability and reduced weight. Its non-metallic construction is resistant to corrosion.
High-Cut Tactical Profile
The FAST high-cut design provides additional space around the ears compared with full-cut helmet profiles. This clearance supports the use of compatible communication headsets, hearing protection and eyewear.
Because of its high-cut construction, this model provides less coverage around the ears than PASGT and other full-cut helmets.
Modular Side Rails
Integrated side rails allow compatible accessories to be attached to the helmet. Depending on the rail specification and adapter used, compatible equipment may include:
- Helmet lights
- Communication headset adapters
- Hearing-protection mounts
- Cameras
- Identification lights
- Face-protection accessories
- Other rail-mounted equipment
Always confirm rail and adapter compatibility before attaching accessories.
Front NVG Shroud
The front shroud provides an attachment point for compatible night-vision mounting equipment. Retention bungees can help stabilize suitable devices and reduce unwanted movement.
Night-vision devices, mounting arms and additional adapters are not included unless specifically stated in the selected package.
Adjustable Padded Liner
The internal pad and suspension system helps distribute helmet weight across multiple contact points. Moisture-managing pads help reduce pressure and improve comfort during extended wear.
Internal Ventilation Space
The liner is designed to maintain space between the wearer’s head and the ballistic shell. This internal air gap supports airflow and helps reduce heat buildup.
Secure Four-Point Retention
The adjustable four-point chinstrap helps stabilize the helmet and reduce unwanted movement. Slide adjusters allow the retention system to be centered and fitted to the wearer.
Quick-Release Buckle
The quick-release buckle allows convenient donning and removal while helping keep the chinstrap secured during normal use.
Reinforced Edge Protection
A rubber-sealed edge helps protect the shell perimeter against routine wear, moisture and environmental exposure. The laser-cut edge provides a clean and consistent finish.
Durable Exterior Finish
The textured exterior finish is designed to resist water, oil, vibration and routine field use. Its wipe-clean surface simplifies regular care and maintenance.
Equipment Compatibility
The high-cut profile is designed to accommodate a range of compatible tactical equipment, which may include:
- Communication headsets
- Hearing protection
- Night-vision mounting systems
- Helmet-mounted lights
- Protective eyewear
- Face shields
- Gas masks and respirators
- Action cameras
- Identification lights
Compatibility depends on the specific equipment, adapter, rail interface, shroud specification and helmet size. Confirm compatibility before operational use.
Ballistic Threat Performance
When tested under the conditions documented in the applicable laboratory report, this helmet is designed to resist the following handgun threats:
- 9 mm, 115 gr at 1,400 ft/s (428 m/s)
- .357 SIG FMJ FN at 1,430 ft/s (435.8 m/s)
Ballistic performance applies only to the tested helmet model, material, shell construction, size and test conditions. Results should not be applied to another configuration without supporting test documentation.
Actual performance may be affected by projectile construction, velocity, impact angle, strike location, environmental exposure, helmet condition and previous damage.
Fragmentation Performance
Reported fragmentation test results:
- Fragment Simulating Projectile: 17 gr (1.1 g), .22-caliber FSP
- Reported V50: 2,192 ft/s (668.1 m/s)
- Highest Partial Penetration: 2,212 ft/s (674.2 m/s)
- Lowest Complete Penetration: 2,172 ft/s (662.0 m/s)
V50 is a statistical measurement representing the velocity at which complete and partial penetrations are expected to occur with equal probability under the specified test conditions. It is not a guaranteed protection threshold for every impact.
These figures should only be published when supported by a laboratory report for this exact helmet model, material and construction.
Fit and Sizing
Available head circumference ranges:
- L: 21.6–23.2 in (55–59 cm)
- XL: 23.2–24.8 in (59–63 cm)
How to Measure
Measure around the widest part of the head with a flexible measuring tape. Position the tape approximately one inch above the eyebrows and above the ears.
How to Adjust the Helmet
- Select the correct helmet size based on head circumference.
- Position the helmet level on the head.
- Arrange the pads to distribute pressure evenly.
- Adjust the suspension to minimize excessive movement.
- Center the chinstrap beneath the chin.
- Tighten all four retention straps evenly.
- Confirm that the helmet remains stable when moving the head.
- Check that mounted accessories do not interfere with fit or retention.
The helmet should fit securely without creating painful pressure points or obstructing vision and hearing.
Intended Applications
This helmet is designed for authorized protective applications, including:
- Law enforcement operations
- Professional security duties
- Military and tactical applications
- Ballistic training environments
- Personal protection programs
- Fragmentation-risk environments
This product is not designed for cycling, motorsports, climbing, construction work or other activities that require different impact-protection standards.
Package Includes
- FAST High Cut Level IIIA UHMWPE Ballistic Helmet
- Adjustable padded liner system
- Adjustable four-point chinstrap
- Quick-release buckle
- Left and right accessory rails
- Front NVG shroud
- Accessory retention bungees
Night-vision equipment, communication headsets, rail-mounted accessories and other devices shown in promotional images are not included unless specifically listed in the selected package.
Care and Cleaning
- Clean the shell using a soft cloth dampened with clean water.
- Use mild soap only when necessary.
- Do not use bleach, solvents, gasoline or abrasive cleaners.
- Allow the shell, straps and pads to air-dry completely.
- Do not machine-wash or immerse the ballistic shell.
- Keep the helmet away from open flames and prolonged high temperatures.
- Store it in a cool, dry area away from direct sunlight.
- Avoid placing heavy objects on the helmet during storage.
- Remove mounted accessories before long-term storage when appropriate.
- Follow the supplied instructions when removing or cleaning the pads.
Inspection and Replacement
Inspect the helmet before and after each use. Check the following components:
- Ballistic shell
- Exterior coating
- Edge seal
- Internal pads
- Suspension system
- Four-point chinstrap
- Adjustment hardware
- Quick-release buckle
- Side rails
- Front NVG shroud
- Accessory bungees and mounting hardware
Remove the helmet from service if it has:
- Sustained a ballistic impact
- Been involved in a severe impact or accident
- Developed cracks, dents, deformation or delamination
- Suffered significant heat or chemical exposure
- Developed a damaged edge seal
- Damaged straps, buckles or suspension components
- Loose or damaged accessory hardware
- Reached the manufacturer’s stated service-life limit
Do not drill, cut, sand, paint or otherwise modify the ballistic shell. Unauthorized modification may reduce ballistic performance and invalidate the applicable test results or warranty.
Threat Rating and Referenced Standard
This helmet is described as Level IIIA based on the documented handgun threats and controlled laboratory test conditions applicable to the exact model.
The referenced ballistic helmet standard is NIJ Standard 0106.01. The statement “tested in accordance with NIJ Standard 0106.01” describes the referenced test method and should not be interpreted as an official NIJ product certification.
Level IIIA is a handgun-rated protection level. This helmet is not designed or rated to defeat rifle ammunition, including:
- 5.56×45 mm
- .223 Remington
- 7.62×39 mm
- 7.62×51 mm NATO
- Armor-piercing ammunition
No ballistic helmet can guarantee protection against every projectile, fragment, impact angle or operating condition. Performance is threat-specific and may be affected by projectile design, velocity, range, impact location, angle, environmental exposure, helmet condition and previous damage.
How long does it take for the order to arrive？
1. Normally, Ballisticamp will deliver to your door within 15 days after payment, if more than 20 days without delivery, Ballisticamp will pay you $5 per day until the total amount of your order
2. If you need expedited delivery, please pay additional courier fee, Ballisticamp will change the courier for you, which will be delivered to your door within 7-10 working days
Where does Ballisticamp ship from？
Ballisticamp has US warehouses and HongKong warehouses. For US addresses, Ballisticamp will choose US warehouses for delivery. No matter which warehouse delivers order, Ballisticamp will guarantee delivery to your door within the time limit. If the time limit is exceeded, Ballisticamp will pay compensation.
Can I get a refund after placing an order?
Unconditional refunds can be made within 24 hours after placing the order. After more than 24 hours, if the order has not been shipped, it can be refunded for you. If the order has been shipped, no refund will be possible. After the order is delivered, in addition to the quality problem of the product itself, the buyer will be responsible for the necessary shipping costs for returns.